The Windermere Edwardian Fireplace insert
The Windermere insert detail
The Windermere Edwardian Tiled Fireplace Insert
rfpi020
A fan design taken from an original
Edwardian Fireplace from Stoke on Trent
The Fireplace insert complements a number of
our Reproduction Fireplace Mantels but
any of these Fireplace Mantels can be manufactured
to surround any
Fireplace insert.
These insert designs are shown at 40" square but
they can be manufactured
at any size if necessary.
We offer a complete bespoke service where each
Fireplace is manufactured to a customers requirements.
Tiled Fireplace including hearth and fret from
£725
To burn solid fuel a stool grate is also required.
Living Flame Gas Fires are also available to suit these Fireplaces.
All tiled products are manufactured in Manchester
at our factory/showroom
site
Different opening
tiles are available in different designs.
Hearth sizes
Originally most pre-war Fireplaces would have had
hearths
laid flush with
the wooden floor.
In general they were about 48" wide and 18" deep.
Current gas and solid fuel regulations now stipulate
that a 2"(50mm)
raised hearth is required.
Our hearths can me made in large sizes so
that the Fireplace Mantel
stands on it, small so that the Fireplace Mantel
stands on the floor
or somewhere in between
(either the Fireplace Mantel or the hearth is cut out).
The
standard sizes are small (39.5" x 16"in 4" tiles)
and large(
54"x15") in 6" tiles but they can
be made in any size or shape
on request.
The Windermere Fireplace with the Oberon Fireplace Mantel
The Windermere Fireplace insert with the teardrop
Fireplace Mantel