Reproduction Inserts
Click here to return to Reproduction Inserts sub-menu

Click pictures below to enlarge

 

The Sunrise Art Decofireplace  insert
The Sunrise Fireplace insert

The Sunrise Art Deco Fireplace Insert

rf10

An Art Deco Fireplace design with a
central tube-lined tile detail.

This Fireplace insert complements a number of our
Reproduction Fireplace Mantels
but any of our Fireplace Mantels
can be manufactured to surround any Fireplace insert.

These Fireplace insert designs are shown at 40" square but
they can be manufactured at any size if necessary.
We offer a complete bespoke service where each
Fireplace is manufactured to a customers requirements.

Tiled Fireplace including hearth and fret from

£695

To burn solid fuel a stool grate is also required.

Living Flame Gas Fires are also available to suit these Fireplaces.

All tiled products are manufactured in
Manchester at our factory/showroom site

Different opening tiles are available in different designs.

Hearth sizes
Originally most pre-war Fireplaces would have had
hearths laid flush with the wooden floor. In general
they were about 48" wide and 18" deep. Current gas
and solid fuel regulations now stipulate that a
2"(50mm) raised hearth is required.

Our hearths can be made in large sizes so that
the Fireplace Mantel stands on it, small so that the Fireplace Mantel
stands on the floor or somewhere in between
(either the Fireplace Mantel or the hearth is cut out).
The standard sizes are small (39.5" x 16"in 4" tiles)
and large( 54"x15") in 6" tiles but they can be made
in any size or shape on request.

The Sunrise Art Decofireplace  insert
The Sunrise Fireplace insert with the Empire Fireplace Mantel

Our Tiled Fireplaces can be made in many sizes and colours.
The main colours we use are now shown on our tile colour page

20th Century Fires reserves the right to make minor design changes to the reproduction inserts or Fireplace Mantels shown on this site.

Our tiles are reproduced using similar methods to the original items and the degree of shade variation is inherent and desirable. Tiles are manufactured to bs6431 and are not guaranteed against crazing. Whilest most tiles do not normally craze, the thickness of glaze necessary to reproduce the very shiny Victorian colours may occasionally cause this to occur. It does not affect the serviceability and actually achieves a truer degree of reproduction effect.

Click here to return to Reproduction Inserts sub-menu