Reproduction Inserts
Click here to return to Reproduction Inserts sub-menu

Click pictures below to enlarge

The Arts and Crafts Arch Fireplace Insert

rf12

A period recreation of a classic Edwardian tiled
arched Fireplace with Arts and Crafts detail

The insert complements a number of our
Reproduction Fireplace Mantels but any of these Fireplace Mantels
can be manufactured to surround any Fireplace insert.

These insert designs are shown at 40" square but
they can be manufactured at any size if necessary.
We offer a complete bespoke service where each
Fireplace is manufactured to a customers requirements.

Tiled Fireplace including hearth and fret from

£795

To burn solid fuel a stool grate is also required.
Living Flame Gas Fires are also available to suit
these Fireplaces.

All tiled products are manufactured in
Manchester at our factory/showroom site

Different opening tiles are not available for this Fireplace.

Hearth sizes
Originally most pre-war Fireplaces would have had
hearths laid flush with the wooden floor.
In general they were about 48" wide and 18" deep.
Current gas and solid fuel regulations now stipulate
that a 2"(50mm) raised hearth is required.

Our hearths can me made in large sizes
so that the Fireplace Mantel stands on it, small
so that the Fireplace Mantel stands on the floor or
somewhere in between (either the Fireplace Mantel
or the hearth is cut out).

The standard sizes are small (39.5" x 16"in 4" tiles)
and large( 54"x15") in 6" tiles but
they can be made in any size or shape on request.

Our Tiled Fireplaces can be made in many sizes and colours.
The main colours we use are now shown on our tile colour page

20th Century Fires reserves the right to make minor design changes to the reproduction inserts or Fireplace Mantels shown on this site.

Our tiles are reproduced using similar methods to the original items and the degree of shade variation is inherent and desirable. Tiles are manufactured to bs6431 and are not guaranteed against crazing. Whilest most tiles do not normally craze, the thickness of glaze necessary to reproduce the very shiny Victorian colours may occasionally cause this to occur. It does not affect the serviceability and actually achieves a truer degree of reproduction effect.