Reproduction All Tiled Fireplaces
Click here to return to Reproduction All Tiled Fireplaces sub-menu

Click pictures below to enlarge

The Gemmill All Tiled Fireplace

rfpc019

A drop shoulder Fireplace design
stepped back from an arched opening

48 inches wide x 38 inches high

Opening width 16 inches x 23 inches
7 inches body depth
Hearth 42 inches wide x 17 inches deep

Tiled Fireplace including hearth, fireback and fret
from £1575

To burn solid fuel a stool grate is also required.
Living Flame Gas Fires are also available
to suit these Fireplaces.

All tiled products are manufactured in
Manchester at our factory/showroom site

Different opening tiles are available
in different designs.

Our Tiled Fireplaces can be made in many sizes and colours.
The main colours we use are now shown on our tile colour page

20th Century Fires reserves the right to make minor design changes to the reproduction inserts or Fireplace Mantels shown on this site.

Our tiles are reproduced using similar methods to the original items and the degree of shade variation is inherent and desirable. Tiles are manufactured to bs6431 and are not guaranteed against crazing. Whilst most tiles do not normally craze, the thickness of glaze necessary to reproduce the very shiny Victorian colours may occasionally cause this to occur. It does not affect the serviceability and actually achieves a truer degree of reproduction effect. In certain conditions high gloss glazes are prone to discolouration and marking due to chemical attack from certain liquids including hard water. Victorian colours are easily scratched and should not be used in areas subject to abrasion.