Reproduction All Tiled Fireplaces
Click here to return to Reproduction All Tiled Fireplaces sub-menu

Click pictures below to enlarge

The Arbuckle All Tiled Fireplace

ra13

An Art Deco All Tiled Fireplace adapted
from an original 1920s design. It is suitable for
1920s / 1930s semis with low ceilings It has a
small central shelf with finger detail underneath
and stepped hand glazed opening blocks.

The hearth has an integral fender.

Width 52"
Height 38"
Hearth Width 48"
Hearth Depth 18"
Opening width 16"

Tiled Fireplace including hearth and fret from

£1750

To burn solid fuel a stool grate is also required. Living Flame Gas Fires are also available to suit these Fireplaces.

All tiled products are manufactured in Manchester at our factory/showroom site

Our Tiled Fireplaces can be made in many sizes and colours.
The main colours we use are now shown on our tile colour page

20th Century Fires reserves the right to make minor design changes to the reproduction inserts or Fireplace Mantels shown on this site.

Our tiles are reproduced using similar methods to the original items and the degree of shade variation is inherent and desirable. Tiles are manufactured to bs6431 and are not guaranteed against crazing. Whilst most tiles do not normally craze, the thickness of glaze necessary to reproduce the very shiny Victorian colours may occasionally cause this to occur. It does not affect the serviceability and actually achieves a truer degree of reproduction effect. In certain conditions high gloss glazes are prone to discolouration and marking due to chemical attack from certain liquids including hard water. Victorian colours are easily scratched and should not be used in areas subject to abrasion.