Reproduction All Tiled Fireplaces
Click here to return to Reproduction All Tiled Fireplaces sub-menu

Click pictures below to enlarge

The Albemarle Art Deco Tiled Fireplace

ra02

An Art Deco inspired Fireplace design. We have found that
this design is also very effective as a Tiled Fireplace Insert

These Fireplaces are shown at 40" wide but can be
manufactured at any size and with variations in shape
if necessary. We offer a complete bespoke service where
each Fireplace is manufactured to a customers requirements.

Tiled Fireplace including hearth and fret from

£875

To burn solid fuel a stool grate is also required.
Living Flame Gas Fires are also available
to suit these Fireplaces.

All Tiled Fireplaces are manufactured in
Manchester at our factory/showroom site

Different opening tiles are available
in different designs.

Hearth sizes
Originally most pre-war Fireplaces would have
had hearths laid flush with the wooden floor. In general
they were about 48" wide and 18" deep. Current gas
and solid fuel regulations now stipulate that
a 2"(50mm) raised hearth is required.

Our hearths can me made in large sizes so that the
Fireplace Mantel stands on it, small so that the Fireplace Mantel stands
on the floor or somewhere in between
(either the Fireplace Mantel or the hearth is cut out).
The standard sizes are small (39.5" x 16"in 4" tiles)
and large( 54"x15") in 6" tiles but they can be made in any
size or shape on request.

Our Tiled Fireplaces can be made in many sizes and colours.
The main colours we use are now shown on our tile colour page

20th Century Fires reserves the right to make minor design changes to the reproduction inserts or Fireplace Mantels shown on this site.

Our tiles are reproduced using similar methods to the original items and the degree of shade variation is inherent and desirable. Tiles are manufactured to bs6431 and are not guaranteed against crazing. Whilst most tiles do not normally craze, the thickness of glaze necessary to reproduce the very shiny Victorian colours may occasionally cause this to occur. It does not affect the serviceability and actually achieves a truer degree of reproduction effect. In certain conditions high gloss glazes are prone to discolouration and marking due to chemical attack from certain liquids including hard water. Victorian colours are easily scratched and should not be used in areas subject to abrasion.